Start Your Quote Request With the Right Details
The quickest way to get accurate pricing is to tell us what you need the equipment or sticker cutting service to do. A shop in Sandton asking for short-run promo labels will need different specs to a production team in Durban or Cape Town needing a print-and-cut setup for daily use.
Please include the size of the graphics, the media type, the expected daily volume and whether you need supply only, delivery, installation or training. If you are comparing options for a new cutter, we can also help you match the machine to your workflow so you do not overspend on capacity you will never use.
- Company name and contact person
- Town or site address for delivery or install
- Type of work: signage, labels, decals, vehicle graphics or custom cut pieces
- Approximate sheet or roll size
- Whether you need setup, training or support after delivery
What We Can Price for You
We quote on specialised print-and-cut contour plotters, premium sticker cutting, nationwide installation and practical support services. If your team is setting up in Isando, Germiston, Midrand or Boksburg, we can usually arrange site visits and onboarding with less delay. For sites further afield, we co-ordinate travel and installation so you know the full picture upfront.
Our pricing also covers support services for operators and supervisors who need help getting consistent results. That can include artwork cut lines, media loading, blade pressure setup, registration calibration, production workflows and troubleshooting. If your team is new to contour cutting, ask for a package that includes induction and follow-up refresher support, it saves time later.
- Machine supply and delivery
- Nationwide installation and commissioning
- Premium sticker cutting on approved jobs
- Operator induction and supervisor coaching
- Remote refresher and technical support
How to Send a Request to Our Team
Email us at cut@contourcutting.co.za with your request and the basics of the job. If you already have artwork, include the files or a brief description of the materials and finish you want. If you do not have final artwork yet, that is fine too, just send what you have and we will tell you what is missing.
For faster handling, mark the subject line with Quote Request and include your location. A quote for an installation in Johannesburg may differ from one for a coastal site where humidity, salt air and transport planning matter. That detail helps us give you the right answer the first time, not a back-and-forth that wastes a day.
- Send your brief by email
- Attach sample artwork or photos if available
- List the township, suburb or industrial area
- Tell us if the job is urgent or planned for later in the month
What Happens After We Receive Your Brief
Once your details come through, our team reviews the job and checks the best fit for your application. Ridwaan Daniels handles sales queries, while operational questions may be picked up by Lerato Mokoena, Ayanda Dlamini or Thabo Molefe depending on the stage of the request. For install planning, Johan van Wyk will look at access, site conditions and any power or workspace constraints.
If we need extra information, we will ask for it directly so the quote stays accurate. You may be asked about available floor space, daily production targets, operator experience or whether load-shedding backup is already in place. That matters for businesses that cannot afford downtime during peak print runs or after-hours installation windows.
When the quote is ready, it will show what is included and what is optional. If you need to compare a supply-only option with a full install and training package, we can set that out clearly so your finance team and production manager see the difference without confusion.
Nationwide Installs, Local Support and Site Readiness
Our cutter installs are available nationwide, with support from Isando and surrounding areas including Sandton, Midrand, Germiston, Boksburg and Randburg. We work with trade clients who need straightforward setup, practical training and clear handover notes. Where access is tight or the site is busy, we schedule carefully so your team can keep working.
Before an install, it helps to prepare the site with a stable surface, clean power and enough room for rolls, finished work and operator movement. If your premises are subject to municipal restrictions, shared loading bays or security timing, mention that early. A little planning makes the install smoother and avoids a last-minute scramble.
- Confirm access times and security requirements
- Check power availability and backup plans
- Clear space for unloading and setup
- Nominate one person on site for handover
Aftercare, Refresher Training and Ongoing Support
A good quote should not stop at delivery. We can include aftercare options such as remote refresher sessions, troubleshooting support and supervisor coaching so your team keeps producing clean cuts after the first week. If your staff changes, or your operators need a practical reset after a busy season, we can help bring everyone back up to speed.
For businesses running sticker cutting in high-volume periods, the right support keeps waste down and reduces downtime. That matters when blades need adjusting, registration marks drift or media loading starts to go off during a rushed shift. If anything feels unclear, ask for it in writing before you approve the order, it is better to sort out the detailss now than during production.
Send Your Request Today
If you are ready for pricing, email your request to cut@contourcutting.co.za and include your delivery or installation location, preferred timeline and the type of cutter or service you need. Contour Cutting has been serving South African businesses since 2008, and our team knows the practical side of getting a job from brief to finished cut.
Whether you need a new contour plotter, nationwide installation or premium sticker cutting for a campaign, we will respond with clear next steps and a quote that matches your requirements. If you are unsure what to ask for, send what you have and we will help you shape the request.
