Home / Plotters / Stickerline 1100

Plotters

Stickerline 1100

The Stickerline 1100 suits print shops that need to move from short runs to steadier sticker output without losing cut accuracy. It handles everyday production work for labels, decals and contour-cut graphics, with support from our Isando team and installs nationwide.

Stickerline 1100

A practical step up for growing sticker work

The Stickerline 1100 is a higher-volume sticker production model for businesses that are already printing steadily and now need cleaner cut lines, better repeatability and less hand trimming. It is used for contour-cut stickers, short-run labels, promo decals, packaging graphics and general print-and-cut work where consistency matters more than speed claims on a brochure.

In plain terms, this is the sort of machine that helps a busy operator move from finishing a few sheets at a time to handling more continuous production. It suits print businesses in Johannesburg, Pretoria, Durban, Cape Town and smaller towns too, especially where artwork changes often and customers expect tighter detail. One missing cut can waste media and time, so setup matters a lot.

  • Higher-volume sticker and label production
  • Contour cutting after print registration
  • Suitable for shops adding a second production line
  • Works well for in-house branding, resellers and contract finishing

Sizes, formats and production fit

The Stickerline 1100 is built around a working width of about 1100 mm, which gives enough room for common roll media without pushing into oversized industrial territory. That size is useful for standard vinyl, label stock and printed media that needs accurate edge following. For many teams, it is the sweet spot between compact bench equipment and large-format finishing systems.

It suits businesses producing medium batches through the day rather than single-piece hobby work. If you regularly cut sheets for sign shops, events, point-of-sale graphics or school and church orders, this model gives more breathing room on layout planning. A good operator can keep output moving, but the setup must be right first.

  • Working width: approx. 1100 mm
  • Best for roll-fed sticker and label media
  • Useful for contour-cut print jobs with registration marks
  • Can support mixed production, from small decals to wider panels

Where it suits best in South African production

This model works well for print businesses that are feeling pressure from faster turnaround times and more custom orders. It is a good fit for sign shops in Isando, Sandton, Midrand, Germiston, Boksburg and Randburg, plus teams serving retail, fleet branding, events and promotional goods. If you are producing for clients who want 200 stickers today and another 50 next week, steady finishing is important.

It also suits businesses that have to manage load-shedding schedules and want their finishing room organised for predictable runs when power is available. In coastal areas, stored media and adhesives can react to humidity, so careful handling matters. A machine like this will not solve bad artwork or poor storage, but it will reward tidy process and trained hands.

  • Print shops handling repeat sticker orders
  • Signage and branding studios
  • Promotional product finishers
  • In-house production teams needing better control

Installation, power and site requirements

We install cutter units nationwide and can guide your team through placement, calibration and first production checks. For the Stickerline 1100, allow a clean, level work area with enough room for loading rolls, trimming and operator access at the rear or side as needed. It should not be squeezed against a wall or placed where dust, water or moving stock can interfere with the feed path.

Power needs are straightforward for most commercial sites, but the machine should be protected with stable supply and proper surge protection, especially in areas where switching happens during load-shedding. A dedicated plug point is usually best. There is no gas requirement. If your workshop runs on backup power, confirm that the inverter or generator can handle the full startup and working load, not just the nameplate figure.

  • Level floor and clear loading space
  • Stable single-phase power supply in most cases
  • Surge protection recommended
  • No gas connection required

Care, servicing and operator training

Good output depends on small habits. Keep the cutting area clean, check blade condition regularly, and do not leave adhesive dust or backing scraps to build up around the feed path. In humid weather, especially near the coast, keep media sealed when not in use. In drier areas, static can make lighter sticker stock misbehave, so handling should stay consistent.

Contour Cutting offers operator induction, blade pressure setup, registration calibration, media loading guidance, maintenance basics and troubleshooting sessions. We also do supervisor coaching and remote refresher support for teams that already run the machine but need sharper control. If the machine starts drifting, it is often because one setting changed and no one noticed, not because the unit is suddenly faulty.

  • Daily wipe-down and debris removal
  • Blade checks and pressure review
  • Regular calibration after media or artwork changes
  • Staff refreshers for smoother production flow

What to check before you order

Before ordering a Stickerline 1100, check the widths you actually run, the roll sizes your team prefers, and whether your artwork is being supplied with proper cut lines. If your studio still sends files with weak registration marks or inconsistent spot colours, even a good cutter will waste time. Ask what your team will need on day one, not just what sounds good on paper.

It is also worth confirming the floor space, access path and operator skill level. If the unit must be moved through a narrow door, around a pillar or into a mezzanine room, say so early. We can help with the practical side of it. For quotations, installs or product advice, email cut@contourcutting.co.za and our Isando team can work through the details with you.

  • Working width and media types
  • Artwork readiness and cut-line setup
  • Available space, access and power point location
  • Training needs for operators and supervisors

Key facts

ModelStickerline 1100
Working widthApprox. 1100 mm
Use caseHigher-volume sticker and label production
MediaPrinted vinyl, label stock and similar roll media
PowerSingle-phase commercial supply, surge protection advised
Service coverageInstallation and support nationwide from Isando, Johannesburg

What clients say

Questions we get asked

Is the Stickerline 1100 suitable for a busy print shop?

Yes. It suits shops that are moving into higher sticker volumes and need reliable contour cutting with less manual trimming.

Do you install outside Johannesburg?

Yes. We install cutter units nationwide and support customers from our Isando base, with area support in Sandton, Midrand, Germiston, Boksburg and Randburg.

What should I have ready before installation?

Have a level work area, stable power, clean media storage and artwork with proper cut lines and registration marks. Training for the operator helps a lot too.

More plotters

Print Cut 1200

Print Cut 1200

A dependable print-and-cut plotter for labels, decals and retail display graphics.

Laminated Graphic Cutter

Laminated Graphic Cutter

A contour system tuned for accurate cuts through laminated printed graphics.

National Install Kit

National Install Kit

A travel-ready installation package for customers outside Johannesburg requiring on-site commissioning.

Planning something? Email the team.

cut@contourcutting.co.za